How To Drain An Above-Ground Pool (3-Methods)

By Shiloh McGinley

January 30, 2024

How To Drain An Above-Ground Pool (3-Methods)

Are you ready to take the plunge and drain your above-ground pool?

Picture this: you’re standing at the edge of your oasis, the sun shining down on your backyard. The water sparkles invitingly, but you know it’s time for a fresh start. With summer coming to an end, it’s essential to properly drain and prepare your pool for the off-season.

But here’s the thing – you don’t need a fancy pump to get the job done. In fact, you can achieve a crystal clear pool with just a few simple methods. Whether you prefer the garden hose siphon technique, the sump pump method, or the drain adapter technique, we’ve got you covered.

In this article, we’ll guide you through the step-by-step process of draining your above-ground pool. We’ll show you how to prepare your pool, dispose of the drained water responsibly, and even how to refill it when the time comes.

Get ready to dive into a pool-draining adventure that offers you the freedom to maintain your paradise on your terms.

How to Drain an Above-Ground Pool

Now, imagine yourself as a master magician, conjuring a spell that effortlessly drains your above ground pool, even without the help of a pump. You have the power to make this happen, and I’m here to guide you through the process.

First, locate the drain plug at the bottom of your pool. It’s usually situated near the deepest end. Remove the plug and attach a garden hose to the drain valve. Make sure the other end of the hose is positioned in a suitable drainage area, such as a nearby sewer drain or a designated spot in your yard.

Next, turn on the faucet to start the flow of water. As the water rushes out of the pool, be prepared for it to take some time, depending on the size of your pool. Keep an eye on the water level and adjust the hose as needed to ensure continuous drainage.

While the water is draining, take this opportunity to clean your pool. Use a pool brush or vacuum to remove any debris or dirt that may have accumulated on the bottom or sides. This will help keep your pool in top shape for your next swimming session.

Once the pool is completely drained, don’t forget to put the drain plug back in place to prevent any unwanted water from entering the pool. And just like that, you’ve successfully drained your above ground pool without the need for a pump. Enjoy your newfound freedom and the satisfaction of accomplishing this task on your own.

Method #1: Garden Hose Siphon

Garden Hose Siphon

To easily remove water from your above ground pool, try using a garden hose siphon – it’s a clever trick that’ll make the process more enjoyable!

This method is perfect if you don’t have a pump or if you prefer a simpler approach. Here’s how it works:

First, locate the drain valve on your pool. It’s usually located at the bottom, near the side. Attach one end of the garden hose to the drain valve and make sure it’s securely fastened.

Next, stretch the hose out so that it extends beyond the edge of the pool and into an area where the water can freely flow away, like a nearby drain or a garden.

Now comes the fun part. Place the other end of the hose in your mouth and start sucking on it gently. Yes, it sounds a bit strange, but don’t worry, you won’t actually be drinking any pool water. Keep sucking until you see the water starting to flow out from the hose. Once the water starts flowing, quickly remove the hose from your mouth and let gravity do the rest.

As the water flows out, you can adjust the position of the hose to control the speed of the drainage. If you want it to go faster, simply lower the hose closer to the ground. And if you want it to go slower, raise the hose slightly. It’s all about finding the right balance.

Using a garden hose siphon to drain your above ground pool is not only effective, but it also gives you a sense of freedom. You have control over the process and can easily adjust it to fit your preferences.

So go ahead and give it a try – you’ll be amazed at how easy and enjoyable it can be!

Method #2: Sump Pump Method

Imagine effortlessly removing water from your pool using a sump pump – it’s a game-changer that’ll leave you amazed and wanting more! Not only is this method easy and efficient, but it also allows you to regain control of your time and enjoy the freedom you deserve.

Here’s how you can use a sump pump to drain your above ground pool:

  1. Position the sump pump: Place the sump pump at the lowest point of your pool, making sure it’s submerged in the water. This’ll allow the pump to effectively remove the water without any hassle.
  2. Connect the hose: Attach a garden hose to the outlet of the sump pump. Make sure the hose is long enough to reach a suitable drainage area, like a nearby sewer drain or a designated area in your yard.
  3. Turn on the pump: Plug in the sump pump and switch it on. Watch as the water starts flowing through the hose and out of your pool, leaving it empty and ready for cleaning or maintenance.

Using a sump pump to drain your above ground pool not only saves you time and effort, but also provides you with the freedom to enjoy your pool without the worry of draining it manually. So go ahead, take advantage of this technique and experience the convenience it offers.

Method #3: Drain Adapter Technique

Hose With Drain Adapter

Get ready to revolutionize your pool maintenance routine with the drain adapter technique – it’s the ultimate solution for effortlessly removing water and reclaiming your time. This technique allows you to drain your above ground pool without the need for a pump, saving you money and hassle. With just a few simple steps, you can have your pool water-free and ready for cleaning or winterizing.

To use the drain adapter technique, you will need a few materials: a drain adapter kit, a garden hose, and a wrench. Start by locating the drain valve on your pool, which is usually located at the bottom. Attach the drain adapter to the valve using the wrench, making sure it is securely fastened. Next, connect one end of the garden hose to the drain adapter and the other end to a suitable drainage area, such as a storm drain or a nearby garden.

Once everything is connected, open the drain valve and let gravity do its work. The water will flow through the hose and out into the designated drainage area. It’s important to monitor the draining process to ensure everything is working correctly and to prevent any flooding or damage.

Using the drain adapter technique provides a hassle-free way to remove water from your above ground pool. It eliminates the need for a pump and allows you to reclaim your time and freedom. So why wait?

Try the drain adapter technique today and experience the convenience and simplicity it brings to your pool maintenance routine.

No need for a pumpSlower draining processMake sure the drain valve is closed tightly
Saves moneyRequires monitoringCheck for any leaks in the hose or adapter
Easy to set upLimited to gravity drainageClear any debris from the drainage area
Allows for reclaiming timeNot suitable for large poolsAvoid draining water into sensitive areas
Suitable for cleaning or winterizingNot suitable for heavily contaminated waterConsider using a filter or pre-filter for cleaner drainage

Remember, the drain adapter technique is a valuable tool that can make your pool maintenance routine easier and more efficient. By following the steps and tips provided, you can successfully drain your above ground pool and enjoy the freedom it brings.

Preparing the Pool

Preparing the pool is an absolute breeze when you utilize the incredible drain adapter technique. Before starting the draining process, make sure you have all the necessary tools and materials at hand.

Firstly, gather a garden hose long enough to reach your desired drainage area. Next, locate the pool’s main drain valve, usually located at the bottom of the pool. Turn off the pool’s filtration system and close the skimmer valves to prevent any water from entering the pool during the draining process.

Once you have everything ready, attach one end of the garden hose to the pool’s main drain valve and secure it tightly. Make sure the other end of the hose is positioned in a suitable drainage area where the water can flow freely. Check that the hose is properly connected by giving it a gentle tug.

Now, open the main drain valve and allow the water to flow out of the pool.

While the water is draining, keep an eye on the hose to ensure it doesn’t become kinked or blocked, as this could impede the drainage process. You may need to periodically adjust the hose to ensure a smooth and steady flow of water.

Once the pool is completely drained, turn off the main drain valve and disconnect the hose.

With the incredible drain adapter technique, preparing your pool for draining is a piece of cake. Enjoy the freedom of a clean and empty pool, ready for whatever comes next.

Disposing the Drained Water

Now that you’ve successfully prepared your above ground pool for draining, it’s time to tackle the next step: disposing of the drained water.

This is a crucial part of the process, as you want to ensure that the water is disposed of properly and responsibly.

One option for disposing of the drained water is to simply let it flow into your yard or garden. This can be a great way to give your plants a much-needed drink, especially during dry periods. However, it’s important to be mindful of any chemicals or debris that may be present in the water, as they could potentially harm your plants or pollute the soil. If you choose this method, make sure to test the water for any chemical levels and remove any solid debris beforehand.

Another option is to drain the water directly into a storm drain or sewer system. This can be a convenient and efficient way to dispose of the water, as it’ll be carried away and treated accordingly. However, before doing so, check with your local authorities to ensure that it’s permissible and in compliance with any regulations or restrictions in your area.

Remember, when disposing of the drained water, it’s important to prioritize the well-being of the environment and your community. By following these guidelines, you can ensure a responsible and environmentally friendly approach to draining your above ground pool.

How to Refill Your Above Ground Pool

To efficiently refill your above ground pool, all you need is a hose and a water source. Start by making sure the hose is securely connected to a faucet or other water supply, ensuring a steady flow of water.

It’s important to choose a water source that’s clean and free from any contaminants, as this will help maintain the quality of your pool water.

Once you have the hose connected and the water source turned on, carefully place the hose inside the pool, making sure it’s fully submerged. This will prevent any air from entering the hose and ensure a continuous flow of water.

As the water starts to fill the pool, keep an eye on the water level and adjust the flow accordingly. It’s important not to overfill the pool, as this can cause unnecessary stress on the pool walls.

Once the pool is filled to the desired level, turn off the water source and disconnect the hose. You can now enjoy your freshly refilled above ground pool!

Refilling your above ground pool is a simple process that can be done without any complications. By following these steps, you can ensure a smooth and efficient refill, allowing you to quickly get back to enjoying your pool. So go ahead, fill up your pool and embrace the freedom of a refreshing swim!

Cleaning and Maintenance

Maintaining a clean and well-maintained above ground pool is essential for an enjoyable swimming experience. To keep your pool in top condition, regular cleaning and maintenance are necessary.

Start by skimming the surface of the water with a net to remove any debris such as leaves or bugs. This will prevent them from sinking to the bottom and becoming harder to clean.

Next, use a pool brush to scrub the walls and floor of the pool, paying extra attention to any areas with visible dirt or algae. This will help prevent the buildup of grime and ensure that your pool stays sparkling clean.

Additionally, it’s important to regularly check and adjust the chemical levels in your pool. Use test strips to monitor the pH and chlorine levels and make any necessary adjustments to keep the water balanced and safe for swimming.

Finally, don’t forget to clean and maintain your pool filter. Regularly clean or replace the filter cartridge to keep the water flowing freely and ensure optimal filtration.

By following these cleaning and maintenance tips, you can enjoy a clean and refreshing pool all season long.


Congratulations on successfully learning how to drain an above-ground pool! By following the techniques mentioned in this article, you’ve gained the power to control the ebb and flow of your pool’s water levels.

Just like the water that flows out of your pool, let go of any worries and stress that may have been weighing you down. Embrace the freedom and renewal that comes with maintaining your pool. Remember, you’re the master of your pool’s destiny. Dive in and enjoy the journey!

Shiloh McGinley

About the author

Shiloh McGinley has been in and around swimming pools her whole life. She's seen a lot of products come and go, and she wants to share with you the best products that really work!

Shiloh is passionate about helping people stay safe in the water, and she loves educating others on how to choose the right pool products.

When she's not working, Shiloh enjoys spending time with her family and friends, and swimming - of course!

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
All search results