Hot Tub Troubleshooting Tips

By Shiloh McGinley

January 30, 2024


Spa Troubleshooting Tips

Are you experiencing issues with your hot tub? Perhaps you recently purchased a hot tub and are now facing problems that you never anticipated. Well fear not, for I’m here to help with these expert proven hot tub troubleshooting tips!

Imagine this scenario: You eagerly step into your brand-new spa, ready to relax and unwind after a long day. But to your dismay, the water remains cold despite the heater being turned on. Frustrating, right?

Don’t worry, we’re here to help. In this article, we will provide you with precise and detailed spa troubleshooting tips to address common issues that may arise with your hot tub. From unheated water to jet malfunctions, noisy pumps, GFCI breaker trips, and weak water flow – we’ve got you covered.

By following our step-by-step instructions and implementing regular maintenance practices, you can ensure that your spa operates smoothly and efficiently. So, let’s get started on resolving these spa troubles and getting you back to enjoying your relaxation time.

Unheated Hot Tub: What’s the Issue?

If your unheated hot tub is experiencing the issue of water heating up and then cooling down, there could be a few potential causes to consider. One possibility is that the thermostat isn’t functioning properly, leading to inconsistent temperature regulation. Another factor could be a problem with the heating element, like a malfunctioning sensor or a buildup of scale or debris. Lastly, inadequate insulation or leaks in the tub could contribute to heat loss and result in fluctuating water temperatures.

Water Heats Up Then Cools Down

Have you ever wondered why your spa water heats up, only to cool down shortly after? This issue can be frustrating and may prevent you from enjoying a relaxing soak in your hot tub. There are several possible reasons for this problem, and understanding them can help you troubleshoot and resolve the issue. To assist you in identifying the potential causes, here is a table summarizing the main factors that can lead to water heating and cooling problems in your spa:

Possible CauseDescriptionSolution
Insufficient heater powerThe heater may not be powerful enough to maintain the desired temperature.Upgrade to a more powerful heater or adjust temperature settings.
Poor insulationInadequate insulation can result in heat loss.Add additional insulation or replace damaged insulation.
Filter issuesDirty or clogged filters can impede water flow and affect heating.Clean or replace filters regularly to ensure proper water circulation.

By considering these potential causes and implementing the suggested solutions, you can address the problem of your spa water heating up and then cooling down, allowing you to enjoy a consistently warm and relaxing spa experience.

Jet Malfunction: What Could Be Wrong?

If you’re experiencing a jet malfunction in your hot tub, it’s important to understand the control panel error codes to determine what could be wrong. The FLO or FLC code indicates a flow issue, which could be caused by a clogged filter or a faulty pump.

The OH code signals an overheating problem, which may be due to a malfunctioning heater or insufficient water flow. Additionally, the DR or DRY code suggests that there is not enough water in the tub, while the COOL or COLD code indicates that the water temperature is below the desired level.

By understanding these error codes, you can troubleshoot and address the specific issue with your hot tub.

Control Panel Error Codes: What Do They Mean?

Control panel error codes can be puzzling, but fear not, there are simple solutions to decode what they mean! When you encounter an error code on your spa’s control panel, it’s important to understand its significance in order to troubleshoot effectively.

Here are some common error codes and their meanings:

  • E1: This code indicates a flow issue, which could be caused by a clogged filter or a malfunctioning pump. Check the filter and ensure proper water flow.
  • E2: This error suggests a temperature sensor problem. It could be due to a faulty sensor or a wiring issue. Inspect the sensor and its connections.
  • E3: This code points to a high limit fault. It means that the water temperature has exceeded the set limit. Check the heater and thermostat for any issues.
  • E4: This error indicates a communication problem between the control panel and other spa components. It could be a wiring or connection problem. Inspect the connections and wiring harnesses.

By understanding these error codes, you can quickly identify the problem and take appropriate action to resolve it.

FLO or FLC

Don’t ignore the FLO or FLC error code – it’s a signal of a flow issue that needs your attention. These error codes indicate a problem with the flow of water in your spa.

FLO stands for ‘flow’ and FLC stands for ‘flow switch closed.’ When you see these error codes on your control panel, it means that the spa is not getting enough water flow or that the flow switch is not functioning properly. This could be caused by a clogged filter, a blocked or restricted water line, or a malfunctioning flow switch.

To troubleshoot this issue, start by checking the water level and making sure the filter is clean. If the problem persists, you may need to call a professional to inspect and repair the flow switch or other components related to the water flow in your spa.

Don’t ignore these error codes, as they can lead to further damage if not addressed promptly.

OH

OH, also known as Overheat, is an error code that indicates a potentially dangerous situation involving high water temperatures in your spa. When the OH error code appears on your spa’s display, it means that the water temperature has exceeded the safe operating range.

This can happen due to a variety of reasons, such as a malfunctioning thermostat, a clogged filter, or a faulty pressure switch. To troubleshoot the OH error, start by turning off the spa and letting it cool down for at least 15 minutes.

Check the filter for any debris or obstructions and clean or replace it if necessary. Inspect the thermostat and pressure switch for any signs of damage or malfunction.

If the issue persists, it’s recommended to contact a professional spa technician to further diagnose and resolve the problem.

DR or DRY

Unfortunately, if you encounter the DR or DRY error code on your spa’s display, it means that there’s a lack of water flow, which isn’t what you want when you’re trying to relax and unwind. To troubleshoot this issue, follow these steps:

  1. Check the spa’s water level: Ensure that the water level is at the appropriate level, as indicated by the manufacturer’s guidelines. Low water levels can lead to poor water flow and trigger the DR or DRY error code.
  2. Inspect the filter: A clogged or dirty filter can restrict water flow. Remove the filter and clean it thoroughly or replace it if necessary.
  3. Verify the pump’s functionality: Ensure that the pump is running properly and that there aren’t any obstructions or blockages in the system.
  4. Check for airlocks: Airlocks can disrupt water flow. Open the spa’s air relief valve or bleed the system to release any trapped air.

By following these troubleshooting steps, you can address the DR or DRY error code on your spa’s display and restore the optimal water flow for a relaxing spa experience.

COOL or COLD

To resolve the COOL or COLD error code on your spa’s display, you’ll need to check if the heater is functioning properly and adjust the temperature settings accordingly to ensure a warm and cozy spa experience.

Start by examining the heater to see if it’s producing enough heat. Check for any loose connections or damaged wires that may be affecting its performance. If everything appears to be in order, move on to the temperature settings.

Ensure that the desired temperature is set correctly and matches your preference. If the temperature is too low, increase it gradually until it reaches the desired level.

Additionally, check if the spa cover is properly insulated to prevent heat loss.

By following these steps, you can troubleshoot and address the COOL or COLD error code on your spa’s display, allowing you to enjoy a soothing and relaxing spa session.

SNA or SNB

Don’t let the SNA or SNB error code on your spa’s display ruin your relaxing soak. These error codes indicate a potential problem with the spa’s sensor circuit.

The SNA code specifically points to an issue with the temperature sensor, while the SNB code indicates a problem with the hi-limit sensor.

To troubleshoot these errors, first, ensure that the spa isn’t overheating or experiencing a low water flow. Check the sensor connections and make sure they’re securely attached. Inspect the sensors for any damage or corrosion.

If everything looks fine, you may need to replace the faulty sensor. Remember to consult your spa’s manual for specific instructions and contact a professional if you’re unsure about performing any repairs yourself.

Noisy Hot Tub Pump: What’s the Cause?

Is your hot tub pump making a loud growling noise? This could be caused by a number of issues, such as a worn-out bearing or a misaligned impeller. To fix this, you’ll need to inspect the pump and replace any damaged parts.

On the other hand, if you hear a high-pitched squealing noise coming from your hot tub pump, it’s likely due to a loose or worn-out belt. To resolve this, simply tighten or replace the belt to restore smooth operation.

Growling Noise

If your spa is making a growling noise, it could be a sign of a mechanical issue that needs to be addressed. The growling noise typically indicates a problem with the pump motor bearings. Over time, these bearings can wear out or become damaged, leading to a growling sound.

To fix this issue, you’ll need to replace the pump motor bearings. Start by turning off the power to your spa and draining the water. Next, remove the pump motor from the spa and take off the motor end cap.

Inspect the bearings for any signs of damage or wear. If they’re worn or damaged, carefully remove them and replace them with new bearings. Once the new bearings are installed, reassemble the pump motor and test it to ensure the growling noise is gone.

Squealing Noise

If you thought the growling noise was bad, wait until you hear the squealing noise coming from your spa. This high-pitched sound can be incredibly annoying and is often a sign of a problem that needs to be addressed immediately.

To help you troubleshoot and fix this issue, here are four things you should consider:

  1. Check the water level: Low water levels can cause the pump to work harder, leading to a squealing noise. Make sure the water level is at the appropriate level.
  2. Inspect the motor bearings: Over time, the motor bearings can wear out and cause friction, resulting in a squealing sound. Lubricate or replace the bearings if necessary.
  3. Examine the drive belt: A loose or worn-out drive belt can cause the pump to squeal. Adjust or replace the belt if needed.
  4. Clean the impeller: A dirty or clogged impeller can cause the pump to strain and produce a squealing noise. Remove any debris and clean the impeller thoroughly.

By following these steps, you can effectively troubleshoot and resolve the squealing noise in your spa.

GFCI Breaker Tripping: What’s the Reason?

If you’re experiencing a tripped GFCI breaker in your hot tub, there are three key points to consider: moisture, damaged or loose wiring, and heating element malfunction.

Moisture can cause electrical shorts and trips in the breaker, so it’s important to check for any signs of water leakage or condensation.

Damaged or loose wiring can also cause a GFCI breaker to trip, so it’s necessary to do a thorough inspection of the electrical connections.

Lastly, a malfunctioning heating element can draw excessive current, leading to a tripped GFCI breaker, so it’s essential to examine this component as well.

Moisture

Excessive moisture in your spa can lead to costly repairs and ruin your relaxation experience. It’s important to address this issue promptly to prevent further damage.

Here are some key factors to consider when dealing with moisture in your spa:

  • Inspect the spa cover: Make sure the cover is in good condition and properly sealing the spa. A damaged or ill-fitting cover can allow moisture to seep in, causing damage to the internal components.
  • Check for leaks: Carefully inspect all plumbing connections, jets, and seals for any signs of leaks. Even a small leak can lead to significant moisture buildup over time.
  • Maintain proper ventilation: Make sure the spa area is properly ventilated to allow for sufficient airflow. This helps reduce moisture accumulation.
  • Control humidity levels: Use a dehumidifier or open windows to regulate humidity levels in the spa area. High humidity can contribute to moisture-related issues.
  • Regularly clean and dry the spa: Clean the spa regularly to remove any excess water, debris, or algae. Make sure to thoroughly dry the spa after each use to prevent moisture buildup.

By addressing these factors, you can effectively manage moisture in your spa and avoid potential damage.

Damaged or Loose Wiring

To effectively manage moisture in your spa and avoid potential damage, it’s crucial to address the issue of damaged or loose wiring.

When the wiring in your spa becomes damaged or loose, it can lead to a variety of problems. Firstly, it can compromise the overall safety of your spa, posing a risk of electric shock. Additionally, damaged or loose wiring can cause the spa’s electrical components to malfunction, resulting in a loss of power or erratic operation.

To prevent these issues, regularly inspect the wiring for any signs of damage or loose connections. If you notice any frayed wires, exposed conductors, or loose connections, it’s important to have them repaired or replaced by a qualified technician.

By promptly addressing damaged or loose wiring, you can ensure the safe and efficient operation of your spa.

Heating Element Malfunction

Check if the heating element in your spa is malfunctioning by feeling for cold water instead of the warm and soothing temperature you desire. If you suspect a heating element malfunction, here are three things to consider:

  • Inspect the power supply: Ensure that the spa is properly connected to a power source and that the circuit breaker isn’t tripped. Faulty wiring or an overloaded circuit can cause the heating element to malfunction.
  • Check the thermostat: Verify that the thermostat is set to the desired temperature and functioning correctly. A faulty thermostat can prevent the heating element from reaching the desired temperature.
  • Examine the heating element: Inspect the heating element for any signs of damage or corrosion. A damaged heating element may need to be replaced to restore proper functionality.

By following these steps, you can identify and troubleshoot a heating element malfunction in your spa, ensuring that you can enjoy the warm and relaxing experience you desire.

Weak or Low Water Flow: What’s the Problem?

If you’re experiencing weak or low water flow in your spa, there could be several reasons for this issue. Firstly, check if your filter is dirty or damaged, as this can restrict water flow.

Secondly, ensure that your spa has an adequate water level, as low water can also result in weak flow.

Lastly, a malfunctioning pump, air lock, or blocked or broken jets can all contribute to low water flow and should be inspected and addressed accordingly.

Dirty or Damaged Filter

A dirty or damaged filter can really ruin the relaxing spa experience you were looking forward to. A clogged filter restricts water flow, leading to weak jets and reduced filtration. On the other hand, a damaged filter may allow debris to bypass it, causing further problems. To determine if your filter is the culprit, check its condition and clean it if necessary. If the filter appears damaged, replacing it with a new one is best. To help you understand the importance of maintaining a clean and functional filter, take a look at the table below:

ProblemCauseSolution
Weak water flowDirty or damaged filterClean or replace filter
Cloudy waterInadequate filtrationClean or replace filter
Increased chemical usagePoor water circulationClean or replace filter

Remember, a properly functioning filter is essential for maintaining clear water and a hygienic spa environment.

Low Water Level

If you’ve already checked and cleaned your spa’s filter but you’re still experiencing issues, it’s time to move on to another potential culprit: low water level. Maintaining the proper water level is crucial for your spa’s optimal performance. When the water level is too low, it can cause various problems, such as inadequate water circulation and inefficient heating.

To troubleshoot this, start by ensuring that the water level is within the recommended range indicated by the manufacturer. If it’s too low, use a garden hose to add water until it reaches the appropriate level. Remember to turn off the spa before adding water to prevent any electrical hazards.

Additionally, keep an eye out for any leaks that may be causing the water level to consistently drop. Addressing low water levels promptly will help ensure your spa operates smoothly and efficiently.

Malfunctioning Pump

The sound of the pump whirred ominously, sending shivers down your spine as you realized it was malfunctioning. Don’t panic, there are steps you can take to troubleshoot this issue.

Here’s a list of things to check:

  1. Check the power supply: Make sure the pump is properly connected to a power source. Check for any loose connections or tripped breakers.
  2. Inspect the pump impeller: Remove the pump cover and inspect the impeller for any debris or clogs. Clean it thoroughly if necessary.
  3. Test the pump motor: Using a multimeter, check if the motor is receiving proper voltage. If not, there might be an issue with the wiring or the motor itself.
  4. Consider the pump seals: Check for any leaks around the pump seals. If there are any, they might need to be replaced to prevent further damage.

By following these troubleshooting steps, you can identify the cause of the malfunctioning pump and take appropriate action to resolve it.

Air Lock

One possible sentence to begin the current subtopic of ‘Air Lock’ could be: Imagine the water flow suddenly stopping, causing a frustrating blockage in the pump.

An air lock occurs when air becomes trapped in the plumbing system, preventing water from flowing smoothly. This can happen due to a variety of reasons, such as improper installation, leaks, or changes in water level.

To troubleshoot and fix an air lock, start by turning off the spa and locating the air bleed valve, usually found on the top of the filter or near the pump. Open the valve slowly to release any trapped air.

If this doesn’t solve the issue, check for any leaks in the plumbing system and repair them accordingly. Additionally, ensure that the water level in the spa is maintained at the recommended level to prevent future air lock occurrences.

Blocked or Broken Jets

Feeling frustrated with your spa? Picture this: you’re trying to relax but your jets are blocked or broken, leaving you without that soothing massage you were craving. When faced with this issue, here are some troubleshooting tips to help you get your jets back in working order:

  • Check for debris: Debris such as leaves, hair, or dirt can clog your jets. Carefully remove any visible debris using a small brush or tweezers.
  • Clean the jet nozzles: Over time, mineral deposits can build up and block the jet nozzles. Use a specialized jet cleaner or a mixture of vinegar and water to dissolve and remove these deposits.
  • Inspect the jet valves: The jet valves control the flow of water to the jets. If they’re stuck or broken, they can prevent the jets from functioning properly. Inspect the valves and replace any that are damaged.

By following these troubleshooting steps, you can restore your spa’s jets to their full functionality and enjoy a truly relaxing experience once again.

Blocked or Worn Out Ozonator

To address a blocked or worn out ozonator in your spa, start by checking the valves of the ozonator for any obstructions or blockages. Clearing any debris or buildup from the valves may help improve water flow.

If the issue persists, you can consider bypassing the ozonator temporarily for testing purposes. This will allow you to determine if the ozonator is indeed the source of the problem.

Check the valves of the ozonator

Check if the valves on your ozonator are properly functioning. It’s crucial to ensure that the valves are working correctly as they play a vital role in regulating the flow of ozone into your spa.

Here are some points to consider:

  • Inspect the valves for any signs of wear or damage, such as cracks or leaks.
  • Test the valves by manually turning them on and off to see if they operate smoothly without any resistance or sticking.
  • Check the valve seals to ensure they’re not worn out or dried up, as this can lead to leaks.
  • Verify that the valves are properly aligned and sealed when closed to prevent any ozone leakage.

By regularly checking and maintaining the valves of your ozonator, you can ensure that it functions optimally, providing effective and efficient ozone treatment for your spa.

Consider bypassing it for testing purposes

If you’re curious about the functionality of your ozonator, you might consider giving it a temporary break for testing purposes. To do this, you can bypass the ozonator and observe the effects on your spa.

Start by locating the bypass valve, which is typically found near the ozonator unit. Turn the valve to the ‘bypass’ position to divert water flow away from the ozonator. This will effectively disable the ozonator, allowing you to determine if it’s causing any issues with your spa.

Keep in mind that bypassing the ozonator is only for testing purposes and shouldn’t be done permanently. Once you’ve completed your testing, remember to return the bypass valve to its original position to restore the normal operation of your ozonator.

Prevention Measures

One effective way to avoid common spa issues is by regularly maintaining and cleaning the filters. This ensures that the water remains clean and free of debris, which can clog the system and lead to malfunctions. Here are three prevention measures that you should consider:

  • Monitor water chemistry: Regularly check and maintain the proper balance of chemicals in the spa water. This includes testing the pH levels, alkalinity, and sanitizer levels. Imbalances can not only affect the water quality but also damage the spa components.
  • Inspect and clean jets: Over time, jets can accumulate deposits and become clogged, affecting their performance. Inspect and clean the jets periodically to remove any build-up and ensure proper water flow.
  • Check for leaks: Regularly inspect the spa for any signs of leaks, such as water puddles or dampness around the equipment. Leaks can lead to water damage and affect the overall functionality of the spa. If you notice any leaks, promptly repair them to prevent further issues.

By following these prevention measures, you can significantly reduce the likelihood of encountering spa problems. Regular maintenance and attention to detail will not only prolong the lifespan of your spa but also provide you with a consistently enjoyable and trouble-free spa experience.

Regular Maintenance

To ensure the optimal functioning of your hot tub, it’s crucial to create and adhere to a regular maintenance schedule. This will help you stay on top of necessary tasks such as cleaning and inspecting the equipment, as well as maintaining proper water chemistry.

Balancing your water chemistry on a regular basis is essential to prevent issues such as water cloudiness, scale buildup, and equipment damage.

Create and stick to a hot tub maintenance schedule

Make sure you create and stick to a hot tub maintenance schedule to keep your spa running smoothly and prevent any potential issues. Regular maintenance is crucial for the longevity and performance of your spa.

Start by establishing a weekly routine that includes checking and adjusting the water chemistry. Test the pH and sanitizer levels using a reliable test kit, and make any necessary adjustments.

Additionally, clean the filter every two weeks to prevent clogging and ensure optimal water flow.

It’s also important to drain and refill your spa every three to four months to maintain water quality and prevent the buildup of contaminants.

Lastly, inspect the spa’s components, such as jets, pumps, and heaters, for any signs of wear or damage.

By following a consistent maintenance schedule, you can maximize the enjoyment of your hot tub and avoid costly repairs.

Balance your water chemistry regularly

Maintaining a balanced water chemistry in your hot tub is essential for optimal performance and enjoyment. It ensures that the water is safe and comfortable for you to soak in. Did you know that the ideal pH level for a hot tub should be between 7.2 and 7.8?

To balance the water chemistry, start by testing the pH and alkalinity levels regularly using a reliable test kit. If the pH is too high, you can use a pH decreaser to bring it down, or if it’s too low, a pH increaser can be used.

In addition, it’s important to monitor the sanitizer levels, such as chlorine or bromine, and adjust them accordingly. By regularly balancing your water chemistry, you can ensure that your hot tub remains clean, fresh, and ready for your relaxation.

Monitor Water Levels

When monitoring the water levels in your spa, it’s crucial to promptly top off any low levels that you observe. By doing so, you can ensure that the spa’s components are adequately submerged and protected. Failure to address low water levels can lead to damage and inefficiency in the system.

Therefore, it’s essential to be vigilant and maintain the water levels at the recommended level for optimal spa performance.

Top off low water levels as soon as you notice them

As soon as you notice low water levels in your spa, be sure to top them off promptly. Maintaining the correct water level is crucial for the proper functioning of your spa and ensuring a safe and enjoyable experience. When the water level falls below the recommended range, it can cause various issues such as inadequate filtration, inefficient heating, and even damage to the spa’s equipment. To help you understand the importance of maintaining proper water levels, here is a table that depicts the potential consequences of low water levels:

ConsequenceDescriptionSolution
Inadequate FiltrationInsufficient water volume to effectively filter impurities.Add water to reach the recommended level.
Inefficient HeatingReduced water volume leads to slower heating.Top off the water to the appropriate level.
Equipment DamageLow water levels can cause equipment to run dry, leading to damage.Fill the spa with water immediately to protect the equipment.

Remember, regularly monitoring and topping off water levels in your spa is essential for its optimal performance and longevity.

Regular Inspection

Regularly inspect your spa for signs of wiring damage or leaks.

Check for any exposed wires, frayed insulation, or loose connections.

Additionally, carefully examine the sealant around the edges of the spa to ensure there aren’t any leaks or cracks.

Check for signs of wiring damage or leaks regularly

Make sure you keep an eye out for any gnawed wires or suspiciously wet spots around your spa if you want to avoid turning your relaxing oasis into an electrifying adventure or a swimming pool. Regularly checking for signs of wiring damage or leaks is crucial to ensure the safety and proper functioning of your spa. Here are some important things to look out for:

  • Inspect all electrical connections, ensuring there are no signs of damage or wear on the wires. Look for exposed or frayed wires.
  • Check for any moisture accumulation around the spa, as this could indicate a leak in the plumbing or equipment. Watch out for wet spots or puddles.
  • Look for any signs of rust or corrosion on electrical connections, which can compromise the performance and safety of your spa. Check for corroded connections.
  • Keep an eye out for any evidence of rodents or pests that may have chewed on the wires, as this poses a serious risk of electrical issues. Watch for chewed or damaged wires.
  • Ensure that all connections are tight and secure, as loose fittings can lead to electrical hazards or water leaks. Check for loose fittings or connections.

By regularly inspecting and addressing any signs of wiring damage or leaks, you can maintain a safe and enjoyable spa experience.

Professional Help

If you’re unable to resolve the issue with your spa after regular inspection and troubleshooting, don’t hesitate to call a professional for help. Professionals have the necessary expertise and experience to identify and fix complex problems that may be beyond your knowledge.

They can provide you with precise and detailed solutions, ensuring that your spa gets back to working order efficiently.

Don’t hesitate to call a professional if you’re unable to resolve the issue

When all else fails, don’t hesitate to call a professional if you’re unable to resolve the issue on your own. Here are four reasons why seeking professional help is the right choice:

  1. Expertise: Professionals have extensive knowledge and experience in spa troubleshooting. They can quickly identify the root cause of the problem and provide an effective solution.
  2. Safety: Spa troubleshooting can involve electrical components and complex systems. Calling a professional ensures that the repair or maintenance is done safely, minimizing the risk of accidents or further damage.
  3. Time-saving: Professionals can efficiently diagnose and fix spa issues, saving you valuable time and effort. They have the necessary tools and resources to get the job done promptly.
  4. Warranty protection: If your spa is still under warranty, attempting DIY repairs may void the warranty. By calling a professional, you can ensure that any repairs or replacements are covered by the warranty.

Remember, when you’re unable to resolve the issue, don’t hesitate to call a professional. They’ll provide the expertise, safety, time-saving, and warranty protection you need for a hassle-free spa experience.

Conclusion

In conclusion, troubleshooting your spa can be a challenging task, but with the right knowledge and guidance, you can overcome any issues that may arise.

Remember to regularly monitor water levels, perform regular maintenance, and conduct inspections to catch any potential problems early on.

However, if you find yourself facing a persistent issue that you can’t resolve, it’s always best to seek professional help.

Don’t let the suspense of a malfunctioning spa keep you from enjoying the relaxation and rejuvenation it can provide.

Shiloh McGinley

About the author

Shiloh McGinley has been in and around swimming pools her whole life. She's seen a lot of products come and go, and she wants to share with you the best products that really work!

Shiloh is passionate about helping people stay safe in the water, and she loves educating others on how to choose the right pool products.

When she's not working, Shiloh enjoys spending time with her family and friends, and swimming - of course!

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
All search results
>